CCTV monitoring system
A ready-made, pre-configured Camkeeper solution will allow you to create a full-fledged monitoring of a video surveillance system at an object in 30 minutes, without resorting to the help of third-party specialists.
Creating a logical map of connecting elements will present a clear hierarchical structure.
Implementing Camkeeper creates an interface of trust between the customer and the service organization.
The system will not only notify about the occurrence of problems with performance, but will also give recommendations on how to eliminate them, as well as notify when the problem is fixed.
Camkeeper is integrated with all devices that transmit data via SNMP, RTSP, HTTP, HTTPS, SNMPv1, SNMPv2, SNMPv3, TLS, JSON RPC, SQL.
Easy Camkeeper connectivity - just plug into your switch and apply power through the included adapter.
The system is working! Evaluate the performance of the security system at a glance
The clarity of working with site plans is primarily relevant for the security service. An understanding of the weak points of the security system immediately appears, to see exactly where the defective equipment is located, and, if necessary, allows you to make the right decision to strengthen a specific area.
Full control over the system at any time
The status report for each device is automatically generated by the system and is available for viewing at any time. Camkeeper allows you to instantly respond to emerging problems, as well as conduct a comprehensive analysis of the interaction of equipment with each other.
Instant notifications
Camkeeper compares the received metrics from devices to match the template every 30 seconds.
In the event of deviations in the monitored devices (abnormal operation), Camkeeper double-checks the data and, if the incident is confirmed, notifies by all available means.
Camkeeper can notify by e-mail, SMS, Telegram bot. The user himself defines the recipients of the notifications.
Notifications contain information about the defective device, the nature of the error, and the time of occurrence.
If the error is corrected, Camkeeper will check 5 times and send a notification about the correction of the situation.
Secure
Camkeeper is a local solution. System health data is not sent to the cloud to third parties and is available only to the user.
Camkeeper has no effect on the overall performance of the monitored system.
Has a built-in modem for independent notification and built-in sensors that monitor the state of the environment.
Smart IT-monitoring standard
The system allows you to significantly reduce the cost of maintaining the security system due to the rapid identification of emerging problems.
In case of malfunctions of elements of the video surveillance system, Camkeeper gives precise recommendations for their elimination.
Full control of occurrence and troubleshooting.
Connection is made in 1 action!
Cheaper, faster, safer
Camkeeper is a ready-made, pre-configured health monitoring solution. Implementation takes significantly less time and does not require fine tuning and modifications, and is also an order of magnitude cheaper than available similar monitoring solutions.
- Interoperability over various data transfer protocols, including RTSP and SNMP< / span>
- Easy to switch on: no special knowledge required to start
- Specialization for security systems
- Ready hardware and software solution
- Built-in data link
- Certified solution, technical support
- Connecting an external antenna for signal amplification and data transmission
- Integration with CRM
- Notification via e-mail, SMS, Telegram
- The presence of a structural (logical) interactive map
- Overlay of device icons on the BTI plan, geographic map
- 80 pre-configured device control templates
- Support for all manufacturers of equipment for security systems
$990
30 minutes setup