Network infrastructure monitoring system
The network infrastructure is the foundation on which any modern security system is based. Camkeeper is a ready-made pre-configured solution that allows you to create a complete monitoring of your network infrastructure in 30 minutes, without the help of third-party specialists.
The logical map clearly demonstrates the interconnection of elements. Camkeeper provides real-time network and hardware diagnostics to help prevent hidden or potential problems. With the help of sensors, the system monitors the condition of the room in order to prevent breakdowns due to external factors.
Camkeeper is integrated with all devices that transmit data via SNMP, RTSP, HTTP, HTTPS, SNMPv1, SNMPv2, SNMPv3, TLS, JSON RPC, SQL. Connection via SSH or Telnet, it is possible to automatically respond to specified events for equipment requiring increased attention.
On average, more than 5000 thousand polling parameters without load on the system, from the temperature of the switch to data transmission errors on the interface. Pre-configured 80 templates in Russian for the entire spectrum of security systems equipment and network infrastructure greatly simplify the monitoring process.
Easy Camkeeper connectivity - just plug into your switch and apply power through the included adapter.
The system is working! Evaluate the performance of the security system at a glance
The clarity of working with site plans is primarily relevant for the security service. An understanding of the weak points of the security system immediately appears, to see exactly where the defective equipment is located, and, if necessary, allows you to make the right decision to strengthen a specific area.
Full control over the system at any time
The status report for each device is automatically generated by the system and is available for viewing at any time. Camkeeper allows you to instantly respond to emerging problems, as well as conduct a comprehensive analysis of the interaction of equipment with each other.
Instant notifications
Camkeeper compares the received metrics from devices to match the template every 30 seconds.
In the event of deviations in the monitored devices (abnormal operation), Camkeeper double-checks the data and, if the incident is confirmed, notifies by all available means.
Camkeeper can notify by e-mail, SMS, Telegram bot. The user himself defines the recipients of the notifications.
Notifications contain information about the defective device, the nature of the error, and the time of occurrence.
If the error is corrected, Camkeeper will check 5 times and send a notification about the correction of the situation.
Secure
Camkeeper is a local solution. System health data is not sent to the cloud to third parties and is available only to the user.
Camkeeper не оказывает влияния на общую работоспособность наблюдаемой системы.
Camkeeper has no effect on the overall performance of the monitored system.
Smart IT-monitoring standard
The system allows you to significantly reduce the cost of maintaining the security system due to the rapid identification of emerging problems.
In case of malfunctions of elements of the video surveillance system, Camkeeper gives precise recommendations for their elimination.
Full control of occurrence and troubleshooting.
Connection is made in 1 action!
Cheaper, faster, safer
Camkeeper is a ready-made, pre-configured health monitoring solution. Implementation takes significantly less time and does not require fine tuning and modifications, and is also an order of magnitude cheaper than available similar monitoring solutions.
- Interoperability over various data transfer protocols, including RTSP and SNMP< / span>
- Easy to switch on: no special knowledge required to start
- Specialization for security systems
- Ready hardware and software solution
- Built-in data link
- Certified solution, technical support
- Connecting an external antenna for signal amplification and data transmission
- Integration with CRM
- Notification via e-mail, SMS, Telegram
- The presence of a structural (logical) interactive map
- Overlay of device icons on the BTI plan, geographic map
- 80 pre-configured device control templates
- Support for all manufacturers of equipment for security systems
$990
30 minutes setup